Torches-Industrial – www.torches-industrial.co.uk

UK 4AA Worklight

Brightest, Smallest, most versatile 4AA cell light.

This fully accessorised worklight can be mounted on a Fire Helmet, PSU Helmet, Hard Hat carried in a belt pouch or fitted to a pocket clip. A necessity for confined space workers, utilities, municipalities, fire fighters, safety inspectors, police, etc...

Features

• Power : 2.1 watts
• Lamp : High brightness Xenon filled
• Burn Time : 4-5 hours
• Battery : 4 Alkaline
• Size : 5.6 x 1.5 x 1.2 inch
• Weight : 6oz (inc. batteries)
• Materials : ABS, polycarbonate, PP Rubber

Waterproof to 10 Feet

Benefits

• Rubber sheath moulded over bezel to reduce glare and improve impact resistance
• Prefocused high intensity spot beam
• Polarised battery contacts, hydrogen scrubber catalyst, and O o-psi vent minimize damage from leaking batteries

CE (Ex) – intrinsically safe for use in hazardous locations

NOTE: The 4AA Xenon torch can be upgraded to eLED by changing the lamp unit and bezel.

Instruction notes for 4AA – 4AA ES2 Instructions (PDF)

>> Buy this product

UK 4AA eLED® Zoom

The UK4AA electronic LED (eLED®) has all the features that make it a tremendous work light.

The 2-watt LED lasts for thousands of hours and maintains constant brightness for over 80% of the battery life. Unlike conventional lights the solid state LED will not break when dropped. As a result, you save real money on the cost of battery and lamp replacements. A twist of the bezel zooms the light between an intense narrow beam and a broad illuminating beam using the unique Projection Optics design. By clicking the switch rapidly one can switch between full power to the LED and less power for extending the burn time. This fully accessorised worklight can be mounted on a hard hat or fire helmet or carried in your pocket or tool box. A necessity for confined space workers, utilities, municipalities, fire fighters, safety inspectors, etc.

• Projection Optics let you zoom with a twist of the bezel from a wide beam to an intense spot
• Single high-intensity 2-watt LED lasts for thousands of hours and will not break when dropped.
• Unique eLED® circuitry maintains constant brightness for 80% of alkaline battery life
• Rubber sheath moulded over bezel to reduce glare and improve impact resistance (passes 6 ft drop to concrete test)
• Push-button thumb switch switches light between ON/OFF and high/low intensity with continuous or momentary action
• New easy loading drop-in battery compartment for quick reload of batteries
• Hydrogen scrubber catalyst, polarized battery contacts and 0-psi vent minimize explosive risk from leaking batteries
• Tough, electrically non-conductive, non-corroding ABS and polycarbonate plastic construction.
• Mounts on all work helmets with accessory mounting clips
• Waterproof to 10 feet
• CE (Ex) – intrinsically safe for use in hazardous locations

Battery : 4 x Duracell MN1500/PC1500, Energizer E91/EN91 or Rayovac AL-AA/815 1.5 V alkaline AA-cells. Although other types of batteries may work in this light, they have not been rated for use in hazardous locations.

NOTE : Light is not certified for use with Lithium batteries in hazardous locations. Use only listed Alkaline cells.

>> Buy this product

UK 4AA eLED® CPO (Compound Path Optics)

• ATEX approved (T4)
• Max Output: 120 Lumens
• Burn time: 4-5 hours
• Waterproof 3 metres
• Weight 177gr
• Size: 155mm x 41mm x 36mm

Thermal recovery system recycles heat from the LED to warm batteries for improved performance in low temperatures. Compound Path Optics(CPO) permit high efficiency and compact size. The eLED bulb will last for up to 100,000 reducing the need for replacement bulbs. Will mount on most hard hats, public order or fire helmets with the addition of the UK universal helmet clip. Please note: The torch is available with ATEX approval, only in graphite non conductive PC/ABS Lexan®.

>> Buy this product

UK 3AA eLED® CPO (Compound Path Optics)

• ATEX approved (T6)
• Max Output: 110 Lumens
• Burn time: 7-8 hours
• Waterproof 3 metres
• Weight 5.3oz/150gr
• Size: 142mm x 41mm x 36mm
• Fits into existing 4AA helmet mounts

Thermal recovery system recycles heat from the LED to warm batteries for improved performance in low temperatures. Compound Path Optics(CPO) permit high efficiency and compact size. Based on the 4AA torch, but shorter and lighter and powered by three AA batteries not four. The eLED bulb will last for up to 100,000 reducing the need for replacement bulbs. Will mount on most hard hats, public order or fire helmets with the addition of the UK universal helmet clip. The torch is available with ATEX approval, only in graphite non conductive PC/ABS Lexan®.

>> Buy this product

UK 3AAA eLED ‘Vizion I’

ATEX approved head torch with rubber strap for mounting on helmets or hard hats (elasticated adjustable head strap available). Oversized push button for ease of use with gloved hands, three beam modes – white spot – white diffused – red diffused with dip facility and, stand alone function when removed from housing.

• ATEX approved (T4)
• 42 lumens (high power) 19 lumens (low power)
• Burn time up to 12 hours
• 3 X AAA batteries
• Weight 111 grams
• Waterproof to 10 metres

>> Buy this product